GT,controlli,Touchscreen User Terminals GT,controlli,Touchscreen User Terminals GT Touchscreen is an interface device which enables the user to connect to the plant via bus operating directly on the screen. It is available in different versions having the following dimensions: 5,7”, 7,5” and 10,4” (see the table above). อ่านเพิ่ม
GTW,controlli,Touchscreen Operator Panels GTW,controlli,Touchscreen Operator Panels GTW Touchscreen is an interface device which enables the user to connect to the plant via bus operating directly on the screen. It is available in different versions having the following dimensions: 10,1” and 15,6” (see the table above). อ่านเพิ่ม
TP-D334-MA,controlli,Differential Pressure Transmitters TP-D334-MA,controlli,Differential Pressure Transmitters Range 0-62.5-125-250 Pa Output Signal 4..20mA Differential pressure transmitters are used in air-conditioning systems for the measurement of differential pressure in room or air ducts and in water distribution systems, for both residential and industrial use. Pressure transmitters are used in water distribution systems, for both residential and industrial use. อ่านเพิ่ม
TP-D334controlli,Differential Pressure Transmitters TP-D334controlli,Differential Pressure Transmitters Range 0-62.5-125-250 Pa Output Signal 0..10V Differential pressure transmitters are used in air-conditioning systems for the measurement of differential pressure in room or air ducts and in water distribution systems, for both residential and industrial use. Pressure transmitters are used in water distribution systems, for both residential and industrial use. อ่านเพิ่ม
TP-D333-MA,controlli,Differential Pressure Transmitters TP-D333-MA,controlli,Differential Pressure Transmitters Range 0-312.5-625-1250 Pa Output Signal 4..20mA Differential pressure transmitters are used in air-conditioning systems for the measurement of differential pressure in room or air ducts and in water distribution systems, for both residential and industrial use. Pressure transmitters are used in water distribution systems, for both residential and industrial use อ่านเพิ่ม
TP-D333,controlli,Differential Pressure Transmitters TP-D333,controlli,Differential Pressure Transmitters Differential pressure transmitters are used in air-conditioning systems for the measurement of differential pressure in room or air ducts and in water distribution systems, for both residential and industrial use. Pressure transmitters are used in water distribution systems, for both residential and industrial use อ่านเพิ่ม
TP-C351 – TP-C361,controlli,Differential Pressure Transmitters TP-C351 – TP-C361 Differential pressure transmitters for immersion applications. Power 24Vac and Output signal 0..10V อ่านเพิ่ม
TP-C34,controlli,Differential Pressure Transmitters TP-C34 Pressure Transmitters for immersion applications. Power 24Vac and Output signal 0..10V or 0..5V อ่านเพิ่ม
TUTA35,controlli,Temperature and relative humidity transmitters TUTA35,controlli,Temperature and relative humidity transmitters Temperature and humidity transmitters are used in air conditioning for the measurement of temperature and % relative humidity. Relative humidity measurement is preformed with an active sensor providing an output signal (voltage or current); temperature measurement is preformed by a passive thermistor NTC 10KΩ. A unique feature of the sensor is its ability to automatically detect what sort of controller input it is connected to, 4-20mA or 0-10Vdc, removing the requirement for output jumpers which can be inadvertently set incorrectly. Just connect it to the controller input and it does the rest. PCB LED indication of which output type is in operation is provided, with diagnostic LED patterns for determining faults. อ่านเพิ่ม
TU-D / TUTD,controlli,Humidity transmitters TU.D consist of an IP55 thermoplasitc case including wiring terminal block and of a tube with vents suitable to fit into the air duct TU.D are available without temperature sensor (TU-D32) and with or temperature sensor (TUTD32) that can be Balco, NTC 10 kOhm or PTC 1 kOhm. Power Supply is 24 Vac. อ่านเพิ่ม
TT,controlli,Temperature Transmitters TT,controlli,Temperature Transmitters TT temperature transmitters are used in commercial and industrial processes for air, gas and fluid temperature measurement in rooms, pipes, tanks, ducts, etc. All the transmitters detect the temperature value to be measured by means of a semiconductor sensing element, whose signal, suitably linearized and amplified, is transformed into a voltage (0…10 V-) or current (4…20mA) output signal. Maximum temperature range of the TT line is -50°C – +100°C. อ่านเพิ่ม
STF72L,controlli,Strap-on Temperature Sensor MVE2xx is a flexible electro-mechanical actuator for the control of two and three way globe valves in: • heating and cooling systems • Air Handling Units • district heating plants • industrial temperature control systems. MVE2xx can be controlled either by a proportional (modulating) signal or by an increase/decrease (Floating) signal. It is easy to mount and connect the actuator. Direct mounting is possible to any CONTROLLI flanged valve. Linkage kits are available for CONTROLLI threaded valves as well as for valves of other manufacturers (table page 3). The actuator has a fine resolution (500 steps on the full stroke range) for exacting fluid control and it is able to self-calibrate on a different stroke without the need of any user action (this function is DIP switch selectable on the field). MVE2xx has intelligent behaviour and alarm functionality in case of unexpected operation, feedback of alarms to the user is provided by LEDs (GREEN and RED) on the control board. N.B.: Do not use the actuator if not coupled with its relating valve อ่านเพิ่ม
STE72L,controlli,Outside Temperature Sensor STE72L,controlli,Outside Temperature Sensor These sensors are for use with MicroNet controllers to provide relevant temperature influence on the heating and air conditioning plant, in accordance with prevailing weather conditions. Their application is a true benefit to modern glass/translucent buildings where solar gain is a negative influence on comfort and occupant efficiency. Energy savings will be realised by allowing for solar contributions. All these sensors can be used in conjunction with MicroNet controllers to influence set points, for monitoring or for direct override of plant schedules. The IP 65 rated designs are durable, reliable and accurate. อ่านเพิ่ม
STC72L,controlli,Pipe Temperature Sensor STC72L,controlli,Pipe Temperature Sensor The STC72L simplifies product selection and improves control loop performance with its unique probe assembly. The shaft is simply extended and inserted into the pocket, ensuring a good contact. The use of the adaptor avoids system drain downs and costly down time. The STC has a 7s response time, making it the optimum choice for economic control solutions. อ่านเพิ่ม
SPTC-X,controlli,Temperature Sensors SPTC-X,controlli,Temperature Sensors Temperature sensors are employed in heating and air conditioning systems for both civil and industrial purposes. Connected to the relevant W500T series controllers, they allow detecting and controlling room, immersion, duct and outside temperature. This series includes also sensors fi tted with potentiometer for the adjustment of the set point of the controller, they are connected to. อ่านเพิ่ม
SNTC-X,controlli,SNTC-X SNTC-X,controlli,SNTC-X Temperature sensor for duct, pipe and external use. SNTC Temperature sensors are employed in heating and air conditioning systems for both civil and industrial purposes. Connected to the relevant controllers they allow detecting and controlling room, immersion, duct and outside temperature. The sensors detect temperature through a sensing element, whose ohm value varies according to the detected unit. Each sensor is characterized by the sensing element type, which determines its ohm/°C function, and by the application. All sensors are provided with a negative temperature coefficient sensing element (ohm value increases when the temperature decreases). All sensors must be connected to the controller by means of two wires, in order to receive the ohm signal generated by the corresponding sensing element. SNTC sensors use two different 10kOhm NTC thermistor with different temperature range and characteristic for controller OmniaPro (SNTC-xL) and for controller Multipro (SNTC). อ่านเพิ่ม