Showing 17–32 of 145 results

SB./SP. – ST./TPC,controlli,Temperature Sensors

SB./SP. – ST./TPC,controlli,Temperature Sensors

Temperature sensors are employed in heating and air conditioning
systems for both civil and industrial purposes.
Connected to the relevant controllers or I/O modules, they allow
detecting and controlling room, immersion, duct and outdoor temperature.

This series include sensors fitted with potentiometer for set point
adjustment of the controller they are connected to, and sensors
equipped with fan speed selector and on-off switch for specific fancoil
application.

STA61L,controlli,OmniaPRO Room Temperature Sensor

STA61L

Room temperature and relative humidity sensor for wall mounting

STA60L/61Lsensors are respectively temperature and temperature/humidity sensors which can be used combined with W560, Liberty and OmniaPRO controllers. The device is provided with a user’s interface composed by:  4 buttons on the frontal panel, a 4-digit number display to visualize hours and labels of menu, parameters and alarms  a 2-digit and a half number display + a temperature/humidity visualization symbol.

STA60L,controlli,OmniaPRO Room Temperature Sensor

STA60L

Room temperature senor with display for wall mounting

STA60L/61Lsensors are respectively temperature and temperature/humidity sensors which can be used combined with W560, Liberty and OmniaPRO controllers. The device is provided with a user’s interface composed by:  4 buttons on the frontal panel, a 4-digit number display to visualize hours and labels of menu, parameters and alarms  a 2-digit and a half number display + a temperature/humidity visualization symbol.

Soavis,controlli,Room Sensors

Soavis,controlli,Room Sensors

Temperature sensors Soavis are employed in heating and air conditioning systems for both civil and industrial purposes. Connected to the relevant controllers, they allow detecting and controlling room temperature. They can be equipped with a potentiometer in order to change the set point.
Room sensors Soavis can have two different type of installation: flush-mounting using box 503 or wall mounting with relevant back-plate. They are composed by a removable front part where you have the electronics, a supporting frame and theback plate if required. The removable front part is compatible with BTicino supporting frame (included) for Living or Light cover plates and with Vimar supporting frames for Plana or Idea cover plates. SOAVIS sensors can be equipped with different thermistor: NTC 5kOhm, NTC 10 kOhm, Balco or PTC 1kOhm for controllers line NR OmniaPRO, Multinet, CX and  Omnia.

UF217,controlli,Hygrostat

UF217,controlli,Hygrostat

The hygrostat type UF217 is used as an on-off controller to
control relative air humidity in air ducts of air conditioning units
and climatic cabinets, and to control air humidifiers and
dehumidifiers. Other areas of use are food storage, cooling
rooms, greenhouses, the textile industry, the paper and printing
industry, film industry and hospitals.
UF217 can be used in almost all applications in which air
humidity control or monitoring is needed.

AS205,controlli,Room thermostat

AS205 room thermostat can be employed in air-conditioning
systems to drive two-pipe fan coil units. It controls,
through a SPDT contact, a two-position valve, which operates
in heating or cooling mode depending on the season
changeover. Moreover, the changeover set to off allows
switching off both the valve and the fan motor power supply.
Acting on the selector, it is possible to set the fan speed as
low, medium and high.

YZB,controlli,Capillary Control Thermostats 200 Line

GENERAL INFORMATION
USE
YZB series controllers are used in air conditioning, heating and thermoventilation
plants where temperature control in fan-coil units is required.
MANUFACTURING CHARACTERISTICS
YZB are on-off electromechanical controllers. Housing containing powerbalance
control group and electrical control device.

AS207,controlli,Room thermostats

AS206 and AS207 thermostats are composed of a white
ABS cover and a base containing the electronic board and
terminals. Bimetal technology with thermal feedback which
improves the steadiness and the accuracy. Range limitation
inside setting knob.

C357,controlli,Bulb Thermostats

C357,controlli,Bulb Thermostats

C300/C350 Bulb thermostats are used in civil and industrial plants where the temperature control of air, gas and liquid in pipe, ducts, tanks etc., is required. They must not be used as safety accessories. C300 are on/off electromechanical thermostats. C350 are proportional electromechanical thermostats. They are composed of a sensing element, a kinematicgroup and an electrical drive switch.

C309,controlli,Bulb Thermostats

C309,controlli,Bulb Thermostats

C300/C350 Bulb thermostats are used in civil and industrial plants where the temperature control of air, gas and liquid in pipe, ducts, tanks etc., is required. They must not be used as safety accessories. C300 are on/off electromechanical thermostats. C350 are proportional electromechanical thermostats. They are composed of a sensing element, a kinematicgroup and an electrical drive switch.

Y111 – Y111RM,controlli,Frost Protection Thermostats

Frost Protection Thermostats. The range of Y111/Y111RM freeze thermostats covers both battery and water pipe freeze protection. Both Y111 and Y111RM have a capillary that will sense the lowest temperature on the face of the battery or the surface of a pipe. They are available in both automatic (Y111) and manual reset (Y111RM) versions.

DIGISTAT +3,controlli,Digital Chronothermostat

DIGISTAT +3,controlli,Digital Chronothermostat

Digistat+3 programmable room thermostat allows you to set
time and temperature periods (up to 6 per day) to suit your
own lifestyle. Once fully installed and powered the Digistat+3
will automatically set the correct time and in auto mode will
control your heating system according to preset programme
1 (9 till 5). The temperature is controlled by sensing air temperature,
switching on the heating when the air temperature
falls below the thermostat setting and switching it off once
this set temperature has been reached.

DGTOUCH2,controlli,Weekly chronothermostat with battery power supply

DGTOUCH2,controlli,Weekly chronothermostat with battery power supply

DGTouch is a weekly chronothermostat with battery power supply
and 3 temperature schedule (comfort, savings and off) for each
day of the week. The chronothermostat has an elegant design and
a large 3.8 “touch-screen display that allows you to set the desired
temperature, both in winter and summer, thanks to the ability to
regulate heating systems and systems of conditioning.
The digital clock allows you to manage your system autonomously
and individually during the day, and the time schedule is simple and
intuitive.
The ability to adjust the room temperature on two levels (Comfort
and Economy) allows an environmental friendly room temperature
control.

C307,controlli,Bulb Thermostats

C307,controlli,Bulb Thermostats

C300/C350 Bulb thermostats are used in civil and industrial plants where the temperature control of air, gas and liquid in pipe, ducts, tanks etc., is required. They must not be used as safety accessories. C300 are on/off electromechanical thermostats. C350 are proportional electromechanical thermostats. They are composed of a sensing element, a kinematicgroup and an electrical drive switch.

AX526,controlli,Proportional Room Thermostat

AX526 room thermostat is used in heating, thermal process,
air-conditioning systems, in civil and industrial plants whenever
temperature control is required. Control is carried out by a 0..10
V- proportional control of a motorised valve or of two motorised
valves in sequence. Typical applications are: reheating coil control
with V.XT/MVT or V.B/MVB56 valves, small A.H.U. – D.P.C,
multizone plants, heating/cooling coils with V.XT/MVT or V.B/
MVB56 valves in hot/cool sequence.
AX526 thermostat can also control MVH56 motorised valves.