Showing 33–48 of 239 results

Series SVT,DWYER,Solenoid Valve Enclosure with Timer

Series SVT Solenoid Valve Enclosure with Timer

Compact Size, NEMA 4X Enclosure

he Series SVT Solenoid Valve Enclosure with Timer is a compact, reliable and economic package designed for small to medium filtration systems. It combines a timer board and solenoid valve enclosure into one package, eliminating the need for separate enclosures and wiring. The SVT is available with 2, 4 or 6 valves. For larger systems expansion modules can be daisy chained to the SVT for a maximum of 60 outputs. The universal power supply accepts 90-240 VAC at either 50 or 60 Hz for both domestic and international requirements. On-Demand Cleaning or Down Time Cleaning functions can be selected with a simple dip-switch. Time-On and Time-Off settings are selected using two potentiometers.
For on demand systems, a Dwyer® A3000 Photohelic® gage or Series 1950 pressure switch may be used with the SVT.

Series LCT216,DWYER,Digital Timer / Tachometer / Counter

Series LCT216 Digital Timer / Tachometer / Counter

3 Controls in 1 Device, DIP Switch Configuration

The Series LCT216 combines a versatile timer, counter, and tachometer in one device. The bright, easy-to-read display shows both the desired set point and the current process value as well as the operating mode that the control is functioning in. The fourteen pre-programmed timer functions are easy to set up and cover most applications. The counting functions include one stage or two stage counting along with batch, total, or dual counting modes. The Series LCT216 can also be used as a tachometer to measure rotational speeds. For quick set up, many of the programming parameters can be set with external dip switches located on the side of the unit.

Series PMT2,DWYER,Particulate Transmitter

Series PMT2 Particulate Transmitter

Digital Damping, Non-Stick Probe, For Broken Bag Detection

The SERIES PMT2 Particulate Transmitter is designed to measure particulate emission levels from dust collector discharge. Using DC coupled electrostatic induction sensing technology, the transmitter monitors a pA current that is generated as particulate passes near the probe; a 4 to 20 mA signal will vary based on the particulate level. The PMT2 offers 6 sensitivity ranges allowing the user to choose the range that will best fit the application. The range and test selector switch can also be set to output a 4 mA or 20 mA signal to assist with set up or trouble shooting. Averaging time setting can be used to dampen the signal if desired.

Series PMT,DWYER,Particulate Transmitter

Series PMT Particulate Transmitter

2-Wire Loop Powered

The Series PMT Particulate Transmitter is a reliable dust collector emissions monitor and leak detector. The loop powered design is ideal for direct connection to existing PLCs or other baghouse diagnostic control systems. Adjustable linear or logarithmic output scaling enables trending both the baseline emissions and the high peak emissions that are caused by filter cleaning cycles and developing leaks. Observation of both baseline and peaks is essential to setting proper alarms.

Series MTL5541,DWYER,Galvanic Barrier

Series MTL5541 Galvanic Barrier

Intrinsically Safe Isolators for Hazardous Locations

The SERIES MTL5541 Galvanic Barrier provides intrinsically safe isolation for communication with Dwyer® transmitters approved for use in hazardous areas. This galvanic barrier eliminates the need for a high integrity earth ground required when using shunt type diode type safety barriers. DIN rail mounting and plug-in signal and power connectors simplify installation and maintenance.

Series KFD0,DWYER,Galvanic Barrier

Model KFD0 Galvanic Barrier

Loop Powered, Intrinsically Safe Isolators

The Model KFD0 Loop Powered, Galvanic Barrier provides complete isolation for communication with Dwyer® intrinsically-safe transmitters approved for use in hazardous areas. Galvanic barrier eliminates the need for a high integrity earth ground required when using shunt type diode type safety barriers. Unlike most other isolators, the Model KFD0-SCSEX1.55 does not require external power and has a low current draw. The housing is designed to easily mount on most standard DIN rails.

Series MTL7787,DWYER,Zener Barrier

Series MTL7787 Zener Barrier

Intrinsically Safe Barriers for Hazardous Locations

The MTL7787 is an intrinsically safe (IS) shunt-diode barrier that can be used to communicate with and provide isolations for certain Dwyer® transmitters approved for use in hazardous areas. These barriers limit the amount of energy allowed to pass into the hazardous area, which inhibit ignition in flammable atmospheres.

Series MTL7706,DWYER,Zener Barrier

Series MTL7706 Zener Barrier

Intrinsically Safe Barriers for Hazardous Locations

The MTL7706 is an intrinsically safe (IS) shunt-diode barrier that can be used to communicate with and provide isolations for certain Dwyer® transmitters approved for use in hazardous areas. These barriers limit the amount of energy allowed to pass into the hazardous area, which inhibit ignition in flammable atmospheres.

Series LTT ,DWYER,SSR Monitor

Series LTT SSR Monitor

Monitors SSRs for Loss of Line, Open Load, Shorted SSR, Loss of DC Power

allow easy monitoring of the operation of your SSR switches. This handy device compares the input status with the output status. An alarm operates a relay contact to tell you if the load circuit has opened or if the SSR has shorted. The LTT mounts easily on most SSRs with no additional hardware. Protect your system today.

SeriesLTP ,DWYER,Single & Three Phase Solid State Relay

Series LTP Single & Three Phase Solid State Relay

Zero-Crossover or Phase Angle Fired

Love Controls LTP Series Solid State Relays allow easy control of most resistive and some inductive loads. Available in zero-crossover or phase angle fired versions, these compact solid state relays fit in many applications.

High efficiency heat sinks allow for compact size. Combined with a convenient DIN rail mount, these SSRs will fit where others won’t. The LTT SSR Monitors and LTTJ Current Transformers mount conveniently on any of the single phase LTP Series SSRs.

Series 784 ,DWYER,4PDT Ice Cube Relays

Series 784 4PDT Ice Cube Relays

15 Amp, 4PDT Operation

The Series 784 Electromechanical Ice Cube Relay is a full-featured 4PDT relay that can be used to handle loads up to 15 amps for AC or DC circuits. Utilizing the same trigger, this relay can be used in underground parking garage applications to signal audible and visual alarms for high levels of carbon monoxide, while opening the dampers and starting the exhaust fans. It features a flag status indicator and a LED status lamp to let the user know when the relay is activated. In order to differentiate between AC and DC actuated models, the push-to-test button is color-coded. For testing the operation, a removable lockdown lever holds the test button in place. The clear plastic housing gives a view of the contacts and there is a removable I.D. tag for labeling the circuit.

Series 783 ,DWYER,3PDT Ice Cube Relays

Series 783 3PDT Ice Cube Relays

15 Amp, 3PDT Operation

The Series 783 Electromechanical Ice Cube Relay is a full-featured 3PDT relay that can control up to 3 devices with a single trigger. It features a flag status indicator and a LED status lamp to let the user know when the relay is activated. In order to differentiate between AC and DC actuated models, the push-to-test button is color-coded. For testing the operation, a removable lockdown lever holds the test button in place. The clear plastic housing gives a view of the contacts, and there is a removable I.D. tag for labeling the circuit. The Series 783 can handle loads up to 15 amps.

Series 781 ,DWYER,O SPDT Ice Cube Relays

Series 781 SPDT Ice Cube Relays

15 Amp, SPDT Operation

The Series 781 Electromechanical Ice Cube Relay is a full-featured SPDT relay that can be used to handle loads up to 15 amps for AC or DC circuits. It features a flag status indicator and a LED status lamp to let the user know when the relay is activated. In order to differentiate between AC and DC actuated models, the push-to-test button is color-coded. For testing the operation, a removable lock-down lever holds the test button in place. The clear plastic housing gives a view of the contacts, and there is a removable I.D. tag for labeling the circuit.

Series 199,DWYER,Open Style Power Relays

Series 199 Open Style Power Relays

DPDT, 40 Amp Rating (AC or DC)

The Series 199 Open Style Power Relays are designed for high AC and DC current applications up to 40 Amps. These mercury-free DPDT relays are available in a variety of trigger voltages and coil resistances to fit most common applications. The riveted housing construction increases the durability and reduces the effects of vibration on the relay.

Series 820,DWYER,DIN Rail Mountable Time Delay Relay

Series 820 DIN Rail Mountable Time Delay Relay

15 Amp, SPDT/DPDT Operation

The Series 820 DIN Rail Mountable Time Delay Relays

can be configured in accordance with 10 different timing functions. Bright red and green LED’s indicate whether the input has been triggered and if the output is active. For greater accuracy, there are 10 time scales and a fine adjustment potentiometer that allows adjustment down to 0.1 seconds. Integral mounting ears allow the Series 820 to mount directly to a DIN rail.

Series 62,DWYER,Hockey Puck Solid State Relay

Series 62 Hockey Puck Solid State Relay

10 or 25 Amp, SPST-NO Operation

 features a terminal cover and LED status indicator. The optically coupled circuitry isolates the input terminals from the output terminals to give the relay 100% pure solid state performance.