50
50
Showing all 8 resultsSorted by popularity
Modulating control valves with magnetic actuator,PN 16
MVF461H..
for hot water, high temperature hot water and steam
• Short positioning time (<2 s), high resolution (1 : 1000)
• Selectable valve characteristic: Equal-percentage or linear
• High rangeability
• Selectable standard interface DC 0/2…10 V or DC 0/4…20 mA
• Phase-cut signal input for Staefa controllers
• Position control and position feedback signal
• Wear-free inductive stroke measurement
• Spring return facility: A → AB closed when deenergized
• Low friction, robust and maintenance-free
Characterised control valve with thermal energy
meter, sensor-operated flow or power control,
power and energy monitoring function, 2-way,
internal and external thread, PN 25
• Nominal voltage AC/DC 24 V
• Control modulating, communicative, hybrid
• For closed cold and warm water systems
• For modulating control of air-handling and
heating systems on the water side
• Ethernet 10/100 Mbit/s, TCP/IP, integrated
web server
• Communication via BACnet, Modbus, Belimo
MP-Bus or conventional control
• PoE (Power over Ethernet) Power supply
possible
• Conversion of sensor signals
• Glycol monitoring
• Power control, flow control, position control
and differential pressure control
Characterised control valve with thermal
energy meter, certified for heating
applications according to MID, fulfills the
requirements of EN 1434. Sensor-operated
flow rate or power control, power and energy
monitoring function, 2-way, internal thread,
PN 25
• Nominal voltage AC/DC 24 V
• Control modulating, communicative, hybrid
• For closed cold and warm water systems
• For modulating control of air-handling and
heating systems on the water side
• Ethernet 10/100 Mbit/s, TCP/IP, integrated
web server
• Communication via BACnet, Modbus, Belimo
MP-Bus or conventional control
• PoE (Power over Ethernet) Power supply
possible
• Conversion of sensor signals
Characterised control valve with thermal energy
meter, sensor-operated flow or power control,
power and energy monitoring function, 2-way,
internal and external thread, PN 25
• Nominal voltage AC/DC 24 V
• Control modulating, communicative, hybrid
• For closed cold and warm water systems
• For modulating control of air-handling and
heating systems on the water side
• Ethernet 10/100 Mbit/s, TCP/IP, integrated
web server
• Communication via BACnet, Modbus, Belimo
MP-Bus or conventional control
• PoE (Power over Ethernet) Power supply
possible
• Conversion of sensor signals
• Glycol monitoring
• Power control, flow control, posit
Characterised control valve with sensoroperated flow control, 2-way, Internal and
external thread, PN 25 (EPIV)
• Nominal voltage AC/DC 24 V
• Control modulating, communicative, hybrid
• For closed cold and warm water systems
• For modulating control of air-handling and
heating systems on the water side
• Communication via BACnet MS/TP, Modbus
RTU, Belimo-MP-Bus or conventional control
• Conversion of active sensor signals and
switching contacts
• Measurement of the fluid temperature
Characterised control valve with sensoroperated flow control with fail-safe, 2-way,
Internal and external thread, PN 25 (EPIV)
• Nominal voltage AC/DC 24 V
• Control modulating, communicative, hybrid
• For closed cold and warm water systems
• For modulating control of air-handling and
heating systems on the water side
• Communication via Belimo MP-Bus or
conventional control
• Conversion of active sensor signals and
switching contacts
• Measurement of the fluid temperature
Flow sensor
Ultrasonic flow sensor for closed cold and hot
water systems containing water or waterglycol
mixtures. It continuously measures the glycol
content of the medium and compensates for it
to ensure an accurate measurement.
The flow sensor is installed in the system via
two external threads (ISO 228-1). The power
supply is AC/DC 24 V and the output signal is
0…10 V or communicative via BACnet MSTP,
Modbus RTU or MP-Bus.
The flow rate can be accumulated.
Programming is carried out with the Belimo
Assistant App via NFC technology.
Thermal energy meter
Thermal energy meter for measuring energy
in a heating or cooling circuit. The device is
certified for heating applications according to
MID and fulfills the requirements of EN1434.
If required, the power supply can be provided
via PoE (Power over Ethernet).
Communication is provided via BACnet,
Modbus or MP-Bus. Configuration is done
with the Belimo Assistant App via NFC
technology or via web server. The
commissioning report can be generated
automatically. Connection to the Belimo
Cloud is possible.